Corsair Cloning Kit Lagringskontrol SATA 3Gb/s USB 3.0 Ikke på lager |
Gå til butik |
Corsair Cloning Kit På lager |
Gå til butik |
Corsair Cloning Kit På lager |
Gå til butik |
Corsair Cloning Kit På lager |
Gå til butik |
Corsair Cloning Kit 2.5" USB 3.0 På lager |
Gå til butik |
Corsair Cloning Kit På lager |
Gå til butik |
Corsair SSD & HDD Upgrade KIT.This kit makes it easy to upgrade your hard drive or solid-state drive to a larger drive. It includes a cable for connecting a 2.5" SSD or notebook hard drive to a USB port, and automated software for copying hard drive data.
Upgrade your drives in two simple steps.
This kit makes it easy to upgrade your hard drive or solid-state drive to a larger drive. It includes a cable for connecting a 2.5" SSD or notebook hard drive to a USB port, and automated software for copying hard drive data. No more software reinstallation.
Cloning your old drive's contents frees you from the time-consuming task of reinstalling your operating system, applications, and data on your new drive.
Great for laptops and notebooks.
Unlike desktop PCs, you can't just add a second internal drive when you run out of space. The Corsair SSD and Hard Disk Drive Cloning Kit makes it easy for you to swap out your old drive for a larger one. Just attach your new SSD or hard drive to your notebook's USB port using the included cable, run the software, and then replace the old drive with your new one. USB 3.0 Speed with USB 2.0 Compatibility.
The USB interface has a transfer rate that's about 4.5 times faster than USB 2.0. If you have a newer system with a USB 3.0 interface, the included USB 3.0 cable will allow you to take advantage of its superior performance. Using an older system? No problem. The cable is backward compatible with USB 2.0 ports.
Contents and Compatibility:
System Requirements - Windows:
Any Windows 8, 7, Windows Vista, or XP system with a USB 3.0 or USB 2.0 port and a CD-ROM reader.
Any SSD or 3.5” hard drive with a standard SATA connector (drive is not included).
Package contents:
USB 3.0 to SATA adapter cable (backward compatible with USB 2.0 ports).
Cloning software on CD-ROM.
System Requirements - Mac OS X:
An Apple G3 processor or later.
A CD-ROM Drive.
A minimum of 64MB of RAM.
An available USB 2.0 or USB 3.0 port.
Supports OS X 9.2 or later, and OS X 10.2 or later.
Generelt | |
Enhedstype | Lagringskontrol - ekstern |
Host Bus | USB 3.0 |
Controller for lagring | |
Interface | SATA 3Gb/s |
Understøttede enheder | Harddisk, solid state drev |
Ekspansion / Konnektivitet | |
Interface | 1 x SATA 3Gb/s - 7-pin Seriel ATA |
Tilslutninger | 1 x USB 3.0 - 9 pin USB Type A |
Medfølgende programmer / Systemkrav | |
Med software | Drivers & Utilities |
OS nødvendig | Microsoft Windows XP, Apple MacOS X 10.2 eller nyere, Apple MacOS 9.2 eller nyere, Microsoft Windows 7, Microsoft Windows Vista, Windows 8 |
Her kan du se hvad andre brugere af PriceBait.dk mener om dette produkt.
Skriv anmeldelse