Cooler Master CM 690 III Sort/Grøn


 
Cooler Master CM 690 III Black and Green
 
Updating an Icon.
 
Seeking to retain the iconic sleek curved mesh styling on the front fasade, CM 690 III designers gave the exterior a feel that harkens back to itsfoundations.
 
With the CM 690 III, Cooler Master sought to look within the chassis for its many design improvements.
Introduction:
Chief among these changes is a completely redesigned interior. Included, is a new HDD/SSD combo cage that allows for 3.5" or 2.5" HDD or SSD deployment in every slot based on user needs. This amounts to up to 10 SSDs being supported through the HDD/SSD cages and one available SSD mount behind the motherboard tray.
 
Should the cage not be needed, the HDD/SSD combo cage can be completely removed to open up space for other hardware. Long graphics cards up to 423mm long and tall CPU coolers up to 171mm are fully supported. Further improving upon tool-less implementations, a new EZ-tray ODD system has been implemented for quick installation.
 
 
 
 
 
 
 
Cooling Customized
 
Lending its inspiration to its predecessor, CM 690 III simultaneously supports two 240mm (2 x 120mm) liquid cooling radiators at the top and front for improved overall airflow. In addition, users have the option of installing a 120mm radiator in the rear.
 
The chassis supports a total of up to 9* fans, with as many as three of them being massive 200mm fans. With these features, air and liquid cooling setups can be customized easily while almost only being limited based on need and imagination.
 
In order to ensure that plenty of airflow reaches each of the many fan inlets, CM 690 III features full mesh coverage on the front and top with plenty of airflow access on the sides and back. Multiple dust filters are provided to minimize dust ingress.
 
Features:
Full mesh on the front panel and top with large vents on the side panel for superior cooling
3 designated places for radiators: 240mm: top, front; 120mm: rear
Supports up to three 200mm large fans for extreme airflow with support for up to 9 total fans (KKN1: 9 fans, KWN1: 7 fans)
New ODD tool-less design "EZ tray" for quick installation
Supports up to 10 SSDs (4 in the removable HDD/SSD combo cage, 1 behind the M/B tray) and 7 HDDs with HDD/SSD combo trays
Dual Super Speed USB 3.0
High-end component support - long graphics cards up to 423mm and tall CPU coolers up to 171mm
Multiple removable dust filters (top, front, PSU) for improved system maintenance
Top compartment with cover to place personal belongings
 
 
 
 
Specifications:
 
Cooling system
Maximum Compatibility
Motherboard Support
Front: 200mm fan x 1 (installed)
Top: 120/140mm fan x 2, or 200mm fan x 1 (optional)
Rear: 120mm fan x 1 (installed)
Side:120mm fan x 2 or 180/200mm fan x 1 (optional)
Bottom: 120mm fan x 1 (optional)
HDD cage: 120mm fan x 1 (optional)
VGA Card length: 423mm
CPU cooler height: 171mm
 
Water cooling compatibility:
Top/ Front: 240mm radiator x 1 (optional)
Rear: 120mm radiator x 1 (optional)
microATX, ATX
 
 
I/O Panel:
USB 3.0 x 2, USB 2.0 x 2
Audio In & Out