EKWB EK-FC980 GTX NI CSQ GPU Block

EKWB EK-FC980 GTX - VGA/GPU Block
- Nickel Original CSQ
 
EK-FC980 GTX is a high performance full-cover water block for nVidia reference (NVA-1G401) design GeForce GTX 980 series graphics cards.
 
This water block directly cools the GPU, RAM as well as VRM.
Introduction:
EK-FC980 GTX Nickel Original CSQ is a high performance full-cover water block for nVidia reference (NVA-1G401) design GeForce GTX 980 series graphics cards. Please check our
Cooling Configurator
online compatibility system for detailed compatibility list!
This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC980 GTX water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic perfromance allowing this product to be used in liquid cooling systems using weaker water pumps
 
Base is made of electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm LED diodes. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M2.5 DIN7985 screws and allows for re-use of the original NVIDIA backplate.
EKWB recommends the purchase of aesthetic retention backplate (EK-FC980 GTX Backplate - Black or Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the circuit board VRM section.
G1/4" threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC980 GTX water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.
Contains
EKWB EK-FC980 GTX Nickel Original CSQ includes following items:
- EK-FC980 GTX series water block - mounting mechanism with screw-in brass standoffs- thermal pads- thermal grease EK-TIM Ectotherm (1g)
 
Compatibility list
Please check compatibility at EK's
Cooling Configurator
.
Important:
- Fittings are not included!
- Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site.
- Water block ports' aligns with the EK-FC780 GTX Ti, EK-FC770 GTX (GW), EK-FC780 GTX Jetstream, EK-FC Titan as well as EK-FC Titan SE